Autodesk users group international

Function one: collect, Save, and cultivate Knowledge I believe success is based on a single factor: being a student for life. As digital artists, one of our greatest resources for learning is the Internet. Unfortunately, we can neither study nor collect the vast 12 www. The key is to sift through the litter and find what is essential, unique, and specific to our goals. For example, if we wish to pursue a path in architectural visualization using 3ds Max it would make sense to study and understand how Roman architecture influenced modern society rather than collecting one of a hundred likely tutorials describing how to create a classical style column in 3ds Max.

Storing a professional library for reference remains essential to providing content with greater understanding and competency. Function two: document unique itemS to PreServe SigniFicance An asset library consisting of a random toy truck model may not be the most efficient use of hard drive space.

There are thousands September To create a professional library, focus on unique items with exceptional quality that you would be excited to use in future scenes.

Function three: Provide ProPer and reasonable access to content A catalogued and sortable library allows artists to free their mind and work seamlessly. Having to search for content creates unnecessary disruption during the creative process.

On the other hand, going overboard with cataloging data can serve as an equal distraction. For example, creating separate folders for interior scenes and exterior scenes is a good idea.

To expand further, one might create subfolders for commercial scenes versus residential scenes, but to expand further may become too distracting to navigate and may break the creative process. The key is to confine your categories to the essential items and utilize additional tools to add information.

This can consist of a PDF document, word document, notes within the files properties, or tools and plug-ins available online. A library in 3ds Max should do the same. With these libraries we should have the ability to consistently refer to them for notes as well as to use or present them with future work. With hope, this will free up time for the creative process while making it simpler to provide a high-quality product that artists can be proud of. Focus on what you enjoy doing in 3ds Max or do most often and start collecting information related to it.

Treat it as though you wish to specialize in that particular function. Based on that, store the best content you have created or found. Net and Senior Designer for Slater Hanifan Group, a civil engineering and planning firm dedicated to superior client service. Brian can be reached at procadman pro-cad. All this begs the question: What is the best way to configure a workstation for maximum throughput? The answer is: It depends on your needs. Rather than simply running an AutoCAD session with general office software it is now common for many of us to use a modelling tool like Revit or Inventor , analysis tools and a rendering package in addition to many more browser based tools.

Depending on your usage cases, the processor and memory requirements for your workstation can be quite different. Multiple CAD applications: If more than one CAD application is running then multiple processing cores will be called upon to balance out the load. For these applications the highest possible clock speed on multiple cores becomes the driving performance factor. RaM Of course the processor can only do its job if it has enough memory RAM to keep up with the demands of your programs.

The logical question then becomes how much RAM really is required? The processor and RAM in your workstation has to boot up, load software and open model files from some sort of permanent disk storage and that storage should definitely be a high speed SSD to gain maximum performance.

HP Workstations offer Autodesk certified professional graphics options to guarantee updated driver support for glitch free operation.

HP Z Workstations deliver the innovation, high performance, expandability, and extreme reliability you need to deliver your 3D CAD projects in less time. Robert Green provides CAD management consulting, programming, speaking, and training services for clients throughout the United States, Canada, and Europe. Reach Robert at rgreen greenconsulting.

As with other system components, identifying your requirements will help you pick the correct GPU for your needs. Start by answering these questions: 1. Will you be designing small projects with limited 3D? Will you design larger 3D systems with some need for visualizations? Will you need to create high resolution screen images from your models?

Will you be using additional rendering tools like 3ds Max to create photorealistic images or animations? Clock rates shown represent maximum turbo step speeds. Multicore is designed to improve performance of certain software products. Not all customers or software applications will necessarily benefit from use of this technology.

Performance and clock frequency will vary depending on application workload and your hardware and software configurations.

Sequential read performance tested with Iometer 1. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.

Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Much of this is because the Department of Transportation is getting deeper into Civil 3D workflows and larger companies are pushing for things to behave a certain way.

This article walks through a couple scenarios for when you could possibly use feature lines in your corridor modeling. If you would like the data used for this article, please email me and I will send the files. In addition to alignments and profiles, feature lines can now be used as corridor baselines. Feature lines can also be selected when creating the corridor and when adding baselines see Figure 1.

A parking lot is a good example of where to apply this new workflow. When I design a parking lot, I typically design the edge of pavement 18 www. An intersection is also a great example of using feature lines within your corridor model. Many people feature line intersections, but up until now it was more of a manual process and not very dynamic.

Extracting and targeting these feature lines is very simple and easy to use in corridor modeling. The functionality of extracting feature lines and keeping them dynamic has been in Civil 3D for as long as I can remember.

However, this functionality has now been enhanced with many new options. Extract all feature lines at once Select them one by one Define Station Range Select a subset based on a corridor region or a simple polyline. We will use this assembly for both examples.

Figure 3 is what I will be using. Sometimes you need just a bit more control, and feature lines will allow you to do so. Select the settings option to choose whether or not to dynamically link them to the corridor.

I first start with extracting the centerline feature lines as a dynamic link to either my profile or corridor. In this case I chose to use my FG profile as the feature from which to extract a feature line we will keep both crowns maintained.

Create your feature lines along the Lip of Gutter Edge of Asphalt using either a polyline and create from objects command, or manually draw in your feature line. Set the grades as you would like along that feature line. For this example, I will assume you know how to do so. The example I am using would look something like Figure 5. The corridor has already been started, with gaps for the intersection area to be modeled. Once we have our assembly created and our feature lines in place, we are ready to begin modeling the intersection.

Select the Corridor, go into your Corridor Properties and select the Parameters tab. The Create Corridor Baseline dialog box will appear. Use the icon next to the Feature Line drop-down to select your feature line from the screen. Once selected, you may be prompted to name the feature line.

Select OK. The Baseline is now added to your corridor and we need to add the region and select the assembly. Choose your assembly and select OK. Rebuild corridor if needed. This will now place the assembly along the feature line. And no need to do a stepped offset! Pretty good so far, right? I use the contextual ribbon for some very useful shortcuts. Use these to really speed up your corridor modeling workflows. Select your corridor from the screen.

Select within the region for the intersection. The Target Mapping dialog box will appear. We first will select the targets to set our Width. Then select both centerline feature lines from the screen. We now need to select the same feature lines for the Outside Elevation Target. Repeat all the above for each intersection. Remember to use your contextual ribbon to assist. This will allow you to set similar targets without going through all the same steps.

Your resulting intersection should look something like Figure 8. Keep in mind that you may need to reverse feature lines from time to time as well. Before now, in order to corridor a parking lot, you would end up with numerous alignment, profiles, assemblies, etc. Now for parking lots of any shape and size, you can simply add each feature line to the corridor as a baseline not separate corridors and apply the correct assembly. Add features lines to corridor as a baseline and apply the assembly.

Repeat as needed for all curbing. After the first couple are in place, create a surface from your corridor model for the finished grade. As you add additional baselines, you can see your parking lot take shape! You can allow the surface to tin from island to island, or even target using an asphalt subassembly. One common issue in corridor modeling is inside and outside corners.

Inspect some of the island and parking areas to see how Civil 3D has now fixed the majority of those issues. Try this on your next site design to really see the benefit of using corridors in this situation. I would love to see your final product! CoNClusioN There are many ways to model a corridor and corridor intersection. Some like to create alignments and profiles, some like to use the intersection tool and modify from there, and some just ignore the intersection I have from time to time.

It was my attempt to display a workflow that you may try and see if it fits your needs. Hopefully this gives you a little direction to at least give the feature line as baseline a shot within your corridor modeling workflows.

As always, I am interested to hear what you think and see how we can improve upon this topic. Good luck and happy modeling! Shawn Herring is a Civil Engineer based out of Utah. Shawn has been a part of the design engineering community for roughly 12 years in all aspects of design, construction and software implementations.

He has implemented and trained companies across the Country on Civil 3D and other infrastructure tools and their best practice workflows. Shawn can be reached for comments or questions at awautocadcivil3dcm augi. Thank you to the over 4, members who took the time to contribute to this resource for-usersby-users!

You can be assured that the higher the number of responses received, the more accurate the report. Just as with all of the AUGI programs, volunteers and these survey participants are what make the magic happen in our community. In 13 years overseeing this report, I do constantly receive and consider feedback from the membership. The first course of discussion is, as usual, the differences in cost of living in various areas.

Thirty percent of survey participants are from outside of the US, and the metro areas and rural areas can be costly or affordable no matter the country, so be sure to check local resources for those variances. I am a big fan of www. The salaries reported here in US dollars, as participants were given a link to a currency converter reflect salary and bonuses for those who work 40 hours a week; they are calculated to exclude overtime pay.

Wages in larger companies average 14 percent higher than those in the smallest firms. Although 74 percent of our users are still in the same job they were last year, only a record low 44 percent intend to stay that way. We see in the March job search poll that 22 percent of users are currently searching for a new job due to dissatisfaction with their current role, and a further 10 percent plan to start looking soon.

Without a doubt, most folks get their jobs through personal connections 45 percent , so be sure to reach out to your professional connections and start networking. Negative factors job insecurity, layoffs, reduced pay continue to decline slowly, while those starting new jobs are on a slight increase.

Keep reading to see which market segments pay the most, and which are busiest now. What Benefits are Available To You? Reminder: All reported average pay is based upon a 40 hour workweek. It would include base pay and potential bonuses, but not overtime pay for hourly workers. The average age of an AUGI member is Fields with higher than average ages are education, electronics, manufacturing and fuels. Fields with lower than average representation are fuels, manufacturing, structural, construction and civil.

The fields paying out the largest raises this year were Construction, Architecture and Electronics. In , 1. The average age of Designers is 44 years. They have approximately nine years with their current employer, and a median 18 years of experience in the industry.

Louis, MO. Melanie can be reached at mistressofthedorkness gmail. Simply put, properly using Shared Coordinates ensures alignment of several Revit models. The question is, can the power of Shared Coordinates still be leveraged if real-world coordinates are unknown at the start of Revit modeling?

What if Revit models have already been started, but not yet set up using Shared Coordinates—can Shared Coordinates still be used? Before getting into what to do, there is a need to explain some fundamental terminology that will be used for locating the projects in an appropriate coordinate system. Models sharing a coordinate system have the same point of origin, i. When selected, the Survey Point reads the location of the icon of the Survey Point relative to the physical origin of the secondary coordinate system.

This does not mean the shared coordinate system originates at the physical location 0,0,0 , but rather that the Survey Point icon is fixated on n. The Project Base Point is used extensively for positioning models at the correct coordinates for proper alignment.

Revit Structure Understanding the effects of moving a Project Base Point in a clipped versus an unclipped state is vital to manipulating models of a dynamic project. Moving the Project Base Point in its clipped state should be used when relocating a Revit model on site, as changing the coordinates of the point moves all modeled and annotative content with it.

Moving an unclipped Project Base Point, however, does not change the physical location of modeled content. This might be used if the Project Base Point needs to be attached to a different physical element of the building or if the reference corner for the building changes.

The purpose of the Master Revit File is to have one file host the coordinates that will be used for sharing across the project.

No matter which scenario is followed to set up Shared Coordinates, the initial steps are performed in the Master Revit File and it is the Master Revit File that will be used by the other Revit files for acquiring the Shared Coordinates.

It is advantageous in model coordination and site layout for the Project Base Point to be attached to a known, referenceable element of the model. For example, the NW exterior corner of the concrete foundation wall. Sometimes Revit modeling must begin before a geo-located CAD file is available. If this is the case, a very similar procedure can be followed, although one that eliminates the initial step of communicating with a CAD file.

All other Revit models can then acquire coordinates from the Master Revit File, establish the same Project Base Point on the designated building element, and begin modeling.

As can be imagined, making the decision in favor of Shared Coordinates at the start of the project leads to the most straightforward way of correctly implementing the feature on a project. Unfortunately, real life gets in the way of ideal project conditions more often than not. Is there any way to implement the benefits of Shared Coordinates if models have already been created that were not set up to use them? Prior to the start of acquiring coordinates from the Master Revit File, each model needs to have its unclipped Project Base Point moved to the same designated element of the linked Master Revit File.

Note that this step assumes that each model has already linked to the Master Revit File by other means Center to Center or Origin to Origin and is already properly aligned with it. The Master Revit File now establishes the coordinate system by following the instructions of either Scenario 1 or 2, which were described earlier. The previously placed clipped Project Base Point will have its coordinates changed at this stage to match the desired physical coordinates.

Note, however, there is one key step that must be done during the export procedure to assure that the shared coordinate system it communicated through the CAD file. Figure 4 shows where to change this setting. Sanjay Raut. CoWin vaccine registration. A police team reached Shantipur, posed as locals and kept watch on Biswas's movements for more than two days.

Facebook Twitter Linkedin EMail. Looking for Something? Start a Conversation. Sudoku Play Now. And the final Top wishes are provided to Autodesk at Autodesk University to encourage for future product development. AUGI basic membership is free. Get ready for one really long blog post. I used my webcam and GoToMeeting web conference software to present to the user group virtually where I could see and hear the attendees and they could see and hear me.

It was pm time Wednesday Halloween and wearing my Zombie Food shirt and pm Thursday for them, so technically I was presenting into the future. Autodesk Users Group International AUGI which is an independent user group of hundreds of thousands of Autodesk product users has a product wish list system. The latest submitted wish list items are now live and ready for you to vote on. The completed wish lists are provided to the Autodesk product teams for consideration in future releases and carries a great deal of importance and priority with the teams.

I will be the lunch entertainment showing some sweet Autodesk technology desserts. In the presentation we will take a sneak peek into the some Autodesk technologies from Autodesk Labs. See where Autodesk's technology might be going and how you can get involved. I will cover the new AutoCAD for Mac and aim wide for those that are Mac curious or newbies to the Mac as well as for the Mac experts and answer questions. AUGI members nominated and voted throughout the year their top wish list items.

Director, AutoCAD.